Fuji NXT Smart SMT Nozzle Cleaner with Automated Nozzle Inspection Large Storage Capacity and Labor-Saving Operation

The FUJI Smart Nozzle Cleaner 2RGKBM00367 automates nozzle cleaning, inspection, and configuration processes. Periodic maintenance for nozzles is critical as it directly impacts placement quality. This system not only cleans nozzles but also performs inspections on items that are difficult to verify through visual operator checks. All maintenance history and inspection results are automatically registered to the system.

Nozzle stations can be set directly after removal from mounters. The Smart Nozzle Cleaner automatically removes nozzles from stations, cleans them, and performs inspections with a single start button push, freeing operators from manual nozzle maintenance tasks.

The Smart Nozzle Cleaner thoroughly checks all nozzle conditions and automatically rejects nozzles that fail inspection into designated reject boxes, categorized by rejection reason.

• 2D code reading verification
• Air flow performance testing
• Nozzle sliding movement assessment
• Nozzle tip damage detection

Through complete automation, operator work time is dramatically reduced from 120 seconds to just 0.4 seconds per nozzle (excluding inspection time). This substantial labor saving is particularly valuable in markets experiencing staffing shortages.

With storage capacity for more than 1,000 nozzles, the Smart Nozzle Cleaner can function as a comprehensive nozzle stocker. Multiple operation modes allow selection of the optimal configuration for your specific production requirements.